Please enjoy the website from a desktop for now.
The critically acclaimed LabEcon series is known for his accurate and consistent pressing quality, and is therefore widely chosen as sample preparation press for quality control and R&D.
Depending on the model – 300, 600, 1000 – the press range goes up to 300, 600 or 1000 kN at 300°C. Regardless of the model or settings used, the results will always be accurate and consistent.
The unit’s small footprint allows it to get installed easily in the lab, while its ergonomic design and straightforward touchscreen interface are appreciated by lab technicians. Furthermore, the LabEcon series incorporates many additional safety features, such as a fixed upper platen, an emergency stop system and a safety shield.
The LabEcon series is recommended for all demanding quality control and R&D applications where accuracy and consistency are prerequisites.
The LabEcon press is delivered with our ProView control system which includes a 15” touch screen for temperature and closing force control. The large screen area of the ProView system gives the user a very good view on the settings and progress of the LabEcon as well as extra comfort to control the unit. It includes an automatic venting system/degassing stroke that allows to vent the unit by automatically opening and closing – after a preset period of time – the press.
The LabEcon press comes with an exhaust or extraction hood that sits on top of the press and can be connected to an existing exhaust system, using the Jacob ø200 mm connection flange.
The roller bed consists of ball transfer units allowing to insert the mold more easily.
The light and sound signal indicates the status of a press cycle.
The heating capacity of the LabEcon models can be expanded up to 400°C. This allows to use of a wider range of sample materials.
When this system is installed, the heating process of the LabEcon presses can be accelerated to 20°C/min. This saves quite some time, as it only takes 8 minutes to reach 180°C (instead of 16 minutes) or just 19 minutes to reach 400°C (instead of 38 minutes).
Automated water cooling of the press platens, controlled by electric valves. This way, the press can be deployed swiftly for upcoming tasks that need a lower temperature setpoint.
Please note that the cooling system can be made compliant with ASTM D4703 (to achieve a 15°C/min cooling ramp) upon request.
By adding extra daylights – this refers to the opening between the lower and higher platens –, a significantly larger number of samples can be processed within the same cycle. Each daylight can have its own heating/cooling settings.
By using optional platens in steel, aluminum or copper, a specific temperature distribution profile can be achieved.
Upon request, the standard guarantee period can be extended. Fontijne Presses also offers preventive maintenance and a calibration service.
Please feel free to contact us or contact Fontijne Presses directly if you would like to have your press customized according to your specific needs. We gladly make you a personalized offer.
| LabEcon | 300 | 600 | 1000 | |
|---|---|---|---|---|
| Max. force* | kN | 300 | 600 | 1000 |
| Platen size* | mm | 320 x 320 | 400 x 400 | 500 x 500 |
| Specific pressure with full load | N/mm2 | 2,93 | 3,75 | 4 |
| Specific pressure with load 250 x 250mm | N/mm2 | 4,8 | 9,6 | 16 |
| Max. temperature | °C | 300 (400°C in option) | ||
| Daylight* | mm | 200 | ||
| Amperage | A | 16 | 32 | 32 |
| Voltage | V | 3 x 400V/50 Hz + zero + ground 3 x 480V/60 Hz + zero + ground |
||
| Length | mm | 790 | ||
| Width | mm | 880 | ||
| Height | mm | 1790 | ||
| Weight | kg | 600 | 800 | 1000 |
The ProView control system allows you full control over the press cycle and comes with a wide range of features and setting options. Discover these features and how to work with them in our clear step-by-step explanatory video.